|
|
Arc/Segment Hard Ferrite Magnets for Applications to Motors and Generators
|
| Minimal Order: 30kg for unit weight <30g/pc; 50kg for unit weight >30g/pc, density 4.8g/cm3
|
| Ref. No. |
Dimensions (mm) |
| OR |
IR |
W |
L |
H |
| AM-001 |
12.0-16.0 |
8.2-10.2 |
16.0-18.0 |
24.0-26.0 |
6.0-8.0 |
| AM-002 |
14.0-18.0 |
7.0-9.0 |
25.5-27.5 |
36.0-38.0 |
11.0-13.0 |
| AM-003 |
15.0-19.0 |
11.0-13.0 |
29.3-31.3 |
27.0-37.0 |
11.0-13.0 |
| AM-004 |
18.0-22.0 |
13.0-15.0 |
34.0-36.0 |
38.0-40.0 |
13.0-15.0 |
| AM-005 |
18.0-22.0 |
13.0-15.0 |
26.0-28.0 |
49.0-51.0 |
10.0-12.0 |
| AM-006 |
19.0-23.0 |
14.0-16.0 |
34.0-36.0 |
28.0-31.0 |
14.0-16.0 |
| AM-007 |
22.0-26.0 |
17.0-19.0 |
39.0-41.0 |
25.0-60.0 |
15.0-17.0 |
| AM-008 |
26.0-30.0 |
20.0-22.0 |
45.0-50.0 |
37.0-50.0 |
18.0-21.0 |
| AM-009 |
26.0-30.0 |
19.0-22.0 |
44.0-46.0 |
35.0-63.0 |
15.5-17.5 |
| AM-010 |
28.0-32.0 |
22.0-24.0 |
49.0-54.0 |
38.0-40.0 |
17.0-20.0 |
| AM-011 |
28.0-32.0 |
22.0-24.0 |
32.0-34.0 |
47.0-49.0 |
10.0-13.0 |
| AM-012 |
32.0-36.0 |
24.0-27.0 |
57.0-59.0 |
40.0-55.0 |
19.8-21.8 |
| AM-013 |
33.0-37.0 |
27.0-29.0 |
23.0-25.0 |
42.0-48.0 |
7.4-9.4 |
| AM-014 |
32.0-36.0 |
26.0-28.0 |
63.0-66.0 |
32.0-51.0 |
24.2-26.2 |
| AM-015 |
32.0-36.0 |
28.0-31.0 |
57.0-59.0 |
38.0-40.0 |
21.0-23.0 |
| AM-016 |
57.0-62.0 |
39.0-43.0 |
100.0-105.0 |
83.0-84.0 |
39.4-41.4 |
| AM-017 |
50.0-54.0 |
40.0-42.0 |
52.0-54.0 |
38.0-40.0 |
14.5-16.5 |
| AM-018 |
49.0-53.0 |
41.0-45.0 |
39.0-54.0 |
21.0-33.0 |
15.0-17.0 |
| AM-019 |
53.0-57.0 |
47.0-49.0 |
75.0-93.0 |
24.0-27.0 |
19.0-21.0 |
| AM-020 |
65.0-69.0 |
53.0-55.0 |
71.0-72.0 |
33.0-35.0 |
23.0-25.0 |
| AM-021 |
78.0-81.0 |
62.0-64.0 |
62.0-64.0 |
130.0-132.0 |
17.5-19.5 |
| AM-022 |
93.0-97.0 |
68.0-70.0 |
91.0-94.0 |
62.0-64.0 |
34.0-36.0 |
| AM-023 |
78.0-82.0 |
69.0-72.0 |
64.0-66.0 |
26.0-35.0 |
7.0-9.0 |
| AM-024 |
103.0-106.0 |
95.0-97.0 |
64.0-66.0 |
24.0-26.0 |
13.0-15.0 |
Dimension tolerance:
Outer radius OR, Inner radius IR and thichness H/T: ±0.15mm
Width W and length L: ±0.2mm for ground surfaces and ±2% for unground surfaces.
|
|
